482 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference
5Obsolete and Discontinued Commands
:MEASure:TMAX
(see page 530)
Command Syntax :MEASure:TMAX [<source>]
<source> ::= {CHANnel<n> | FUNCtion | MATH}
<n>::={1|2|3|4}forthefour channel oscilloscope models
<n> ::= {1 | 2} for the two channel oscilloscope models
The :MEASure:TMAX command installs a screen measurement and starts
an X- at- Max-Y measurement on the selected waveform. If the optional
source is specified, the current source is modified.
Query Syntax :MEASure:TMAX? [<source>]
The :MEASure:TMAX? query returns the horizontal axis value at which the
maximum vertical value occurs on the current source. If the optional
source is specified, the current source is modified. If all channels are off,
the query returns 9.9E+37.
Return Format <value><NL>
<value> ::= time at maximum in NR3 format
See Also •"Introduction to :MEASure Commands" on page 218
•":MEASure:TMIN" on page 483
•":MEASure:XMAX" on page 255
•":MEASure:XMIN" on page 256
NOTE The :MEASure:TMAX command is obsolete and is provided for backward compatibility to
previous oscilloscopes. Use the :MEASure:XMAX command (see page 255) instead.