Agilent Technologies 5000 Series manual SBUSLINPARity, TRIGgerLIN Commands on

Commands by Subsystem 3

:SBUS:LIN:PARity

Command Syntax

N O T E

(see page 530)

:SBUS:LIN:PARity <display>

<display> ::= {{1 ON} {0 OFF}}

The :SBUS:LIN:PARity command determines whether the parity bits are included as the most significant bits (MSB) in the display of the Frame Id field in the LIN decode bus.

This command is only valid on 4 (analog) channel oscilloscope models when the automotive CAN and LIN serial decode option (Option AMS) has been licensed.

Query Syntax	:SBUS:LIN:PARity?
	The :SBUS:LIN:PARity? query returns the current LIN parity bits display
	setting of the serial decode bus.
Return Format	<display><NL>
	<display> ::= {0 1}
Errors	• "- 241, Hardware missing" on page 501
See Also	• "Introduction to :SBUS Commands" on page 277
	• ":TRIGger:LIN Commands" on page 364

Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference 285