Intel 7190 manual Command to display, List of saved

C H A P T E R 5 Boot Monitor Command Reference

CommandDescription

setup	This command initiates the setup procedure of the 7190. The system
	displays prompts for all inputs necessary to initialize system.
	Example:
	monitor>setup
	Auto config NIC card? [n] --->y
	Done Ether config: auto
	Enter hostname [nsb-9] --->
	Autoboot? [enable] --->
	Enable DHCP? [n] --->
	Enter domain (’-’ to delete) [mysite_ex.com] --->
	Primary name server (’-’ to delete) [10.1.1.10] -->
	Add additional name server (<return> to end) [] --->
	Enter IP address [10.1.1.1] --->
	Enter Netmask [255.255.254.0] --->
show	This command displays a specified saved boot configuration file. Type
NOTE: Use the dir	show, then the name of the configuration file you wish to view.
	Example:
command to display
	monitor>show
the list of saved
	Configuration file name? [] ---><filename>
configuration files.
	Boot Monitor Command Reference

57