
C H A P T E R 6 | CLI Command Summary |
Command | Description | |
log | Enables or disables logging. When logging is enabled, the DNS | |
NOTE: Enabling logging | server logs details of the incoming queries, the balancing process | |
for VIP selection, and the query response to the log file. Default: | ||
may reduce the speed of | ||
disabled. | ||
DNS resolutions. | ||
Syntax: | ||
| ||
| config dns log [enabledisable] | |
|
| |
status | If the 7190 is a primary, Displays the secondary 7190(s) to which | |
| it is currently connected. | |
| If the 7190 is a secondary, Displays the connection status to its | |
| primary. | |
|
|
primary
NOTE: Each primary can have simultaneous connections to as many as four secondary 7190s.
Designate the device as the primary 7190. Connection to any unit previously designated as primary is lost when this command is executed. Default: enabled.
Syntax:
config dns primary [enabledisable]
where:
enable designates the 7190 as the primary.
config dns | Designates this unit as a secondary 7190. | |
secondary | Syntax: | |
NOTE: Upon successful | config dns secondary <primary ip address> | |
where: | ||
connection to the primary, | ||
primary ip address is the address of the primary 7190 to | ||
all commands under config | ||
which the current unit is subordinated as a secondary. | ||
dns zones become | ||
| ||
unavailable to the |
| |
secondary. Primary and |
| |
secondary configurations |
| |
are the same and are |
| |
transferred to the |
| |
secondary after every |
| |
“commit” within the |
| |
primary. |
| |
|
| |
| Config DNS Commands |
95