C H A P T E R 8 | Rebooting with the New Image and Verifying Installation |
Rebooting with the New Image and Verifying Installation
NOTE: If any errors occurred during installation, show sys software may display the image as installed, however it is not safe to use. Use config sys software delete to delete the image and repeat the installation before continuing. If the problem persists, contact Intel Technical Support.
When the image has been downloaded and installed, it can be verified by typing show sys software info. For example, after downloading and installing an update, show sys software info may display the following:
Index | Product | Version | Patch | Build |
1 | 7190 | 3.0 | 1.0 | D1 |
2 | 7190 | 3.1 | 0.0 | D12 (running) |
This indicates that the image at index 1 has been installed and is ready for service, and the image at index 2 is running. To activate the new image, type config sys software boot 1. The 7190 reboots under the new image. This command can also be used to revert to the previous version.
Restoring Your Previous Configuration
After the 7190 reboots and comes up under the new image, you can restore your previous configuration with the restore command.
147
