
C H A P T E R 6 | CLI Command Summary |
Command | Description |
info | Information is displayed one page at a time if the file size is |
| greater than 500K even when more (‘paging’) is disabled. This |
| info command (at the root level) displays only current |
| configurations, i.e., ‘committed’ changes (performed in the |
| Config branch). This is the same information displayed from info |
| commands on the Show branch of the CLI commands. |
System Information
•Including the 7190’s unit identifier, MAC address, IP address, Netmask, Broadcast, Default Route, and Nameservers.
SNMP Information
•Including SNMP state (running or stopped), if
Software Information
•For each installed version: Image index number, Product description, Version number, Patch number, Build number
CLI Information
•Number of concurrent Telnet sessions allowed, Root prompt, (number allowed of) Login attempts, More (‘paging’) state, (number of) Screenlines, System ID, CLI Timeout value, CLI port number, Wizard state (enabled or disabled)
NTP Servers Information
•Displays information about any configured NTP servers.
DNS Information
•Primary or secondary (state), Logging state, Flash Information (Flash state, Polling Interval, Max Broadcast Delay, aliasing state, Number of Polls, Drop Misses), Agent information and services configured under each agent, ISV Group information and services under the ISV, Zone information, Hostname and information (load balancing method), and Site Services information.
logout | Exits the current |
Global System Commands
77