Intel 7190 manual Reset does not Delete saved, Configuration files, Command rewrites, Default

C H A P T E R 5 Intel® NetStructure™ 7190 Multi-Site Traffic Director User Guide

Command	Description
factory_reset	This command resets system to factory defaults. Values affected by this
NOTE: factory	command are:
		Entire current DNS configuration is deleted
_reset does not	•
delete saved	•	Route parameters
configuration files.
	•	CLI parameters
CAUTION: This	•	IP address
command rewrites	•	Default route
the default
configuration to the	•	Hostname
default.cfg	•	Domain
configuration file.
	•	Name servers
	•	DHCP is disabled
	• Autoboot is set to “enabled”
halt	This command halts the 7190 system.
		Boot Monitor Command Reference

52