Intel 7190 manual Save

C H A P T E R 6 Intel® NetStructure™ 7190 Multi-Site Traffic Director User Guide

Command	Description
put	Transfers a configuration to the specified remote file or directory.
	If the remote-directory form is used, the remote host is assumed
	to be a UNIX device. Because the TFTP protocol has no user-
	login or validation, sites employing it typically enforce some file
	access restrictions. Such restrictions are specific to each site and
	vary widely in scope and methods.
	Syntax:
	put <filename> to <TFTP URL>
	where:
	TFTP URL is the address of the tftp server to which you wish to
	send the configuration file.
	filename is the name of the file to send.
	Example:
	put default.cfg to tftp://192.168.30.2/tftpboot/default.cfg
remove	Removes a configuration file.
	Syntax:
	remove <filename>
	where:
	filename is name of the configuration file to be removed.
restore	Restores a CLI configuration from a previously saved file. (See
	save.)
	Syntax:
	restore <filename>
	where:
	filename is the name of the configuration file to be restored.
	(The default file name is default.cfg.)
	Execute the command commit local or commit all to
	activate the restored configuration.
restore-verbose	As restore above, but displays each line of the restored file.
	File Management Commands

80