
C H A P T E R 6 | CLI Command Summary |
Command | Description |
standby | Sets the mode of a service to standby for all hosts that currently |
| map to it. |
|
|
| Config DNS Agents Commands |
| Config DNS ISV Groups Command |
Command | Description |
|
|
config dns isvgroups | Moves to the config dns isvgroups command level. |
|
|
config dns isvgroups | Displays configured information of all ISV Groups in this 7190. |
info | For example: |
| ISV Group: isv2 |
| State: Enabled Probe Interval:30 Probe Timeout:15 |
| Primary Flash Src:10.1.1.1 Primary Flash Port:2000 |
| Backup Flash Src: 10.1.1.2 Backup Flash Port: 2000 |
| ISV Group: isv3 |
| State:Enabled Probe Interval:30 Probe Timeout:15 |
| Primary Flash Src: Not Defined Primary Flash Port:0 |
| Backup Flash Src: Not Defined Backup Flash Port:0 |
| Probe Interval: How frequently the services in an ISV group are |
| polled for availability. |
| Probe Timeout: How long to wait for a response to an ISV service |
| availability poll. |
|
|
create <isvname> | Creates an ISV group name. ISV name is the hostname of any |
| generic load balancer that you wish to configure. |
| For example: |
| create isv2 |
| Creates the ‘isv2’ group. |
|
|
delete <isvname> | Deletes a configured ISV group, specified by the ISV name. |
|
|
rename <isvname> new <isvname>
Changes the name of an existing ISV group to the new one specified.
For example:
rename isv2 new generic2
changes the name ‘isv2’ to ‘generic2.’
Config DNS ISV-Groups Commands
103