Intel 7190 manual Sets the maximum time delayed before a response is returned

C H A P T E R 6 Intel® NetStructure™ 7190 Multi-Site Traffic Director User Guide

CommandDescription

config dns flash	Sets the maximum time delayed before a response is returned,
max-delay	setting the maximum tolerated network latency between peer
	Flash agents. Default value is 5000ms. Range is 0 to 30,000ms.
	Syntax:
	config dns flash max-delay <number>
poll-interval	Specifies the interval, in seconds, at which a Flash agent polls its
	peer agents to determine the network latency to each peer. Default
	value is 10 seconds. Range is 1 to 255.
	Syntax:
	config dns flash poll-interval <number>
num-polls	Defines the number of data points involved in calculating the
	average network latency to a Flash agent. Each data point is the
	result of one completed poll. The default value is 100. Range is
	10 to 255.
	Syntax:
	config dns flash num-polls <number>
drop-miss <number	Specifies the number of consecutive missed poll responses
of misses>	allowed before a flash peer is marked “unavailable”.
aliasing	Enables or disables IP aliasing. The show dns flash info
[enabledisable]	command displays whether aliasing is enabled or disabled.
	Config DNS Flash Commands

118