Intel 7190 manual Boot Monitor Command Reference

C H A P T E R 5 Boot Monitor Command Reference

Command	Description
autoboot	Use this command to enable or disable the Autoboot function. When
	Autoboot is enabled, during startup the 7190 prompts you to press a key
	to enter the Boot Monitor command line interface. If you ignore the
	prompt, startup concludes with the 7190 in normal operating mode
	(displaying the Intel 7190# prompt). When Autoboot is disabled,
	the startup sequence is interrupted and displays the Boot Monitor
	interface (displaying the monitor> prompt). Autoboot is enabled by
	default.
	To enable Autoboot, press Enter to accept the default “enable.” To
	disable, enter disable, then press Enter.
	Example:
	monitor>autoboot
	Autoboot? [enable]--->
	Boot Monitor Command Reference

49