Intel 7190 Entered names, IP addresses, Example are for, Illustrative purposes, Only, May vary

C H A P T E R 5 Intel® NetStructure™ 7190 Multi-Site Traffic Director User Guide

CommandDescription

boot	This command boots the 7190 using a specified configuration.
NOTE: User-	Example:
entered names and
	monitor>boot
IP addresses in the
	Current active configuration
example are for
	----------------------------
illustrative purposes
	Product:	7190
only. The	Version:	3.0
appropriate values	Patch Level:	0.0
for your installation	Build:	D18
may vary.	----------------------------
	Current time:	Fri Mar 31 14:04:56
	Current Config:	default.cfg
	Hostname:	intel7190
	Using DHCP:	No
	IP Address:	10.1.1.11
	Netmask:	255.255.255.0
	Default Route:	10.1.1.1
	Domain:	xyz-ex.com
	Primary nameserver:	10.1.1.101
	NTP:	Enabled
	Servers:	10.1.1.2
	NIC setup:	auto
	Autoboot:	Enabled
	Boot timeout:	5 (seconds)
	Boot current configuration? [y]
	Please stand by, the system is being rebooted.

delete	This command deletes the specified configuration file from 7190.
	Example:
	monitor>delete
	Enter the configuration file to delete [] --->
	filename.cfg

Boot Monitor Command Reference

50