Intel 7190 manual Sys secondary create ip command

C H A P T E R 6 Intel® NetStructure™ 7190 Multi-Site Traffic Director User Guide

CommandDescription

config sys	Delete old versions of the software from local storage. It can be
software delete	used to free local storage to install a version update or product
	upgrade.
	Syntax:
	config sys software delete <index>
	where:
	index is a valid index number of an installed software image,
	as displayed using the command,
	config sys software info
	(also: show sys software info)

secondary

NOTE: secondary commands do not need to be committed to become active (they are in effect for any future connection attempts).

Changes the prompt level to the config sys secondary branch.

secondary any	Allows any secondary 7190 to connect to the primary 7190. This
	command is executed on the primary 7190.
secondary info	Displays information about which secondary 7190s can connect.
secondary flash	Allows only secondary 7190s with an IP address in the Flash peer
	list to connect. This command is executed on the primary 7190.
secondary list	Displays only secondary 7190s configured using the config
	sys secondary create <ip> command.
secondary create	Adds addresses to the config sys secondary list. These are
<ip>	addresses of 7190s that can be connected as secondaries.
secondary delete	Deletes addresses from the config sys secondary list.
<ip>
NOTE: Deleting an
address prevents future
connections for the
specified address.
	Config Sys Commands

88