Intel 7190 manual Number of sessions to, You are disabling all future, Telnet sessions to

C H A P T E R 6 Intel® NetStructure™ 7190 Multi-Site Traffic Director User Guide

Command	Description
telnet-sessions	Sets the allowable number of concurrent inbound remote CLI
NOTE: If you set the	login sessions.
	Syntax:
number of sessions to 0,
	config CLI telnet-sessions <nsessions>
you are disabling all future
	where:
Telnet sessions to the 7190.
	nsessions is the number of allowed sessions (0 to 8). The
To reset Telnet, you must
	default number of sessions is 0. .
access the device through
the serial port and login,
then change the Telnet
session count from 0, to a
number from 1 to 8

timeout

NOTE: Too small of a timeout value renders the CLI useless.

Sets or changes the idle timeout period before automatic logout for CLI sessions. The timeout value can be set to 0, which specifies no timeout. To set a value, use the range 30 to 65535 seconds.

Syntax:

config CLI timeout <seconds>

where:

seconds is the timeout period in seconds (0, or a range of 30 to 65535). The default is 900 seconds (15 minutes).

Config CLI Commands

84