
Using the Configuration Utility (continued)
Authentication > WPA/WPA2 >802.1X
Select WPA/WPA2 in the Authentication field.
When you select WPA/ WPA2, 802.1X is Enabled.
Click
Authentication Config
The Advanced Security Set- tings screen will appear, as shown below.
Select the EAP Type you want to use. Configure the information needed for
authenticating.
Inner Authentication
Protocol.
For an explanation of the terms shown in this window please see the
appendix.
Trusted CA List.
Click OK. The WPA/WPA2 configuration is complete!
Configuration>WPA/WPA2
Advanced Security Settings
17