Getting Started (continued)

Setting up a Wireless Infrastructure Network

2

For a typical wire- less setup at home (as shown here),

1

please do the following: 7

3

4

6

DWL-AG530

DI-784

5

DWL-AG660 with Laptop PC

You will need broadband Internet access (a Cable or DSL-subscriber line into your home or office).

Consult with your Cable or DSL provider for proper installation of the modem.

Connect the Cable or DSL modem to your broadband router. (See the Quick Installation Guide included with your router).

Install the D-Link AirPremierTM AG DWL-AG530 Wireless PCI Adapter into an available PCI slot on your desktop computer.

(See the Quick Installation Guide included with the network adapter).

Install the D-Link DWL-AG660 Wireless Cardbus Adapter into a laptop computer.

(See the Quick Installation Guide included with the DWL-AG660).

If you wish, you may connect a computer that is equipped with an Ethernet network adapter (such as a DFE-528TX) to the router also.

A RADIUS server is optional. Connect a RADIUS server to your network to use all the features of WPA. (Without a RADIUS server you can still use the WPA Pre-Shared Key mode.) RADIUS Authentication can also be provided by another service provider over the Internet and remote to your network site.

11

Page 11
Image 11
D-Link DWL-AG530 manual Getting Started, Setting up a Wireless Infrastructure Network