NETGEAR WNR2000-100FSS user manual The Wireless Access Point screen displays

N300 Wireless Router WNR2000v4

The Wireless Access Point screen displays:

2.Select the Enable Access Point Mode check box. The screen adjusts.

3.Configure the IP address settings for the router:

•Get dynamically from existing router. By default, the Get dynamically from existing router radio button is selected, enabling the router to receive its IP address and other IP settings from the other router or gateway in your network.

•Use fixed IP Address. Select the Use fixed IP Address radio button to set up static IP address settings.

NETGEAR does not recommend this setting.

Note: If the other router or gateway in your network also has wireless capability, NETGEAR recommends that you use wireless settings on your router that are different from those on the other router or gateway to avoid interference. You could also disable the wireless radio on the other router or gateway and use your router only for wireless client access.

4.Click the Apply button.

Advanced Settings

87