NETGEAR WNR2000-100FSS user manual  To set up remote management

N300 Wireless Router WNR2000v4

To set up remote management:

1. Select Advanced > Advanced Setup > Remote Management.

2.Select the Turn Remote Management On check box.

3.Under Allow Remote Access By, specify the external IP addresses to be allowed to access the router’s remote management.

Note: For enhanced security, restrict access to as few external IP addresses as practical.

•To allow access from a single IP address on the Internet, select the Only This Computer radio button. Enter the IP address that is allowed access.

•To allow access from a range of IP addresses on the Internet, select the IP Address Range radio button. Enter a beginning and ending IP address to define the allowed range.

•To allow access from any IP address on the Internet, select the Everyone radio button.

4.Specify the port number for accessing the router user interface.

Normal web browser access uses the standard HTTP service port 80. For greater security, enter a custom port number for the remote router user interface. Choose a number between 1024 and 65535, but do not use the number of any common service port. The default is 8080, which is a common alternate for HTTP.

5.Click the Apply button.

Advanced Settings

107