Commands by Subsystem 3

:TRIGger:TV:MODE

(see page 530)

Command Syntax :TRIGger:TV:MODE <mode>

<mode> ::= {FIEld1 FIEld2 AFIelds ALINes LINE VERTical LFIeld1 LFIeld2 LALTernate LVERtical}

The :TRIGger:TV:MODE command selects the TV trigger mode and field. The LVERtical parameter is only available when :TRIGger:TV:STANdard is GENeric. The LALTernate parameter is not available when :TRIGger:TV:STANdard is GENeric.

Old forms for <mode> are accepted:

<mode>

Old Forms Accepted

 

 

FIEld1

F1

 

 

FIEld2

F2

 

 

AFIelds

ALLFields, ALLFLDS

 

 

ALINes

ALLLines

 

 

LFIeld1

LINEF1, LINEFIELD1

 

 

LFIeld2

LINEF2, LINEFIELD2

 

 

LALTernate

LINEAlt

 

 

LVERtical

LINEVert

 

 

Query Syntax :TRIGger:TV:MODE?

The :TRIGger:TV:MODE? query returns the TV trigger mode.

Return Format <value><NL>

<value> ::= {FIE1 FIE2 AFI ALIN LINE VERT LFI1 LFI2 LALT LVER}

See Also "Introduction to :TRIGger Commands" on page 313

":TRIGger:TV:STANdard" on page 386

":TRIGger:MODE" on page 319

Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference

383

Page 383
Image 383
Agilent Technologies 5000 Series manual TRIGgerTVMODE, Mode Old Forms Accepted