Agilent Technologies 5000 Series manual TRIGgerLINSYNCbreak, Query Syntax

3Commands by Subsystem

:TRIGger:LIN:SYNCbreak

	(see page 530)
Command Syntax	:TRIGger:LIN:SYNCbreak <value>
	<value> ::= integer = {11 12 13}
	The :TRIGger:LIN:SYNCbreak command sets the length of the LIN sync
	break to be greater than or equal to 11,12, or 13 clock lengths. The sync
	break is the idle period in the bus activity at the beginning of each packet
	that distinguishes one information packet from the previous one.
Query Syntax	:TRIGger:LIN:SYNCbreak?
	The :TRIGger:LIN:STANdard? query returns the current LIN sync break
	setting.
Return Format	<value><NL>
	<value> ::= {11 12 13}
See Also	• "Introduction to :TRIGger Commands" on page 313
	• ":TRIGger:MODE" on page 319
	• ":TRIGger:LIN:SIGNal:DEFinition" on page 497
	• ":TRIGger:LIN:SOURce" on page 368

370 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference