368 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference
3Commands by Subsystem
:TRIGger:LIN:SOURce
(see page 530)
Command Syntax :TRIGger:LIN:SOURce <source>
<source> ::= {CHANnel<n> | EXTernal} for the DSO models
<source> ::= {CHANnel<n> | DIGital0,..,DIGital15} for the MSO models
<n>::={1|2|3|4}forthefour channel oscilloscope models
<n> ::= {1 | 2} for the two channel oscilloscope models
The :TRIGger:LIN:SOURce command sets the source for the LIN signal.
Query Syntax :TRIGger:LIN:SOURce?
The :TRIGger:LIN:SOURce? query returns the current source for the LIN
signal.
Return Format <source><NL>
See Also •"Introduction to :TRIGger Commands" on page 313
•":TRIGger:MODE" on page 319
•":TRIGger:LIN:TRIGger" on page 371
•":TRIGger:LIN:SIGNal:DEFinition" on page 497