What to do, if...?
You can remedy most problems yourself. In many cases you can save time and
expense, since you will not have to call in customer service.
The following tips should help you locate and remedy the cause of a problem.
However, please note the following:
,Repairs to electrical appliances should only be carried out by qualified
professionals. Work performed by unqualified persons can place the user at
considerable risk.
Test and fault messages.
Problem Cause Solution
Cancelling a program
0and Finish appear in
the display
The buzzer sounds.
This is not a fault.
The electronics
recognizes that there is
no laundry in the drum
and cancels the program.
Drying of single or
already dried laundry
items can also lead to
program cancellation.
In future, dry individual
laundry items with the
warm air program.
Cancelling test
message:
– Open and close door
0-§ appears in the
display.
Gentle indicator light
flashes.
The lock function has
been activated.
If you wish to dry, you
must disable the lock
function (see "Electronic
lock function").
Canceling a program
The buzzer sounds.
Flashing display may
show Cold air or Finish.
The cause is not immedi-
ately obvious.
–Switch the dryer off
and then on again.
–Start a program.
If program interruption
and error message occur,
a fault is present. Contact
Miele customer service.
Trouble shooting
29