1 Adapter
2 Sink coupling nut
3 Hose clip
4 End of hose
5 Non-return valve
6 Dryer drain hose
^Fit the adapter to the sink drain outlet
1with the sink coupling nut 2.
Usually the sink coupling nut has a
flat washer, which you must remove.
^Fit the end of the hose 4to the
adapter 1.
^Using a screwdriver, tighten the hose
clip 3directly behind the sink
coupling nut.
,Install the non-return valve 5so
that the arrow points in the direction
of flow (towards the sink). Otherwise,
pumping out will be impossible.
^Insert the non-return valve 5into the
dryer drain hose 6(make sure it is
connected in the right direction,
check the arrow on the non-return
valve!).
^Attach the non-return valve using the
hose clips.
Installation and connection
42