Nlynx ETU400 manual Prtxfrmpc Command, Pcmbr

PRTXFRMPC Command

Parameter description	Parameter name	Parameter values
PC data file	FILE	Host file name
Library name		*LIBL
PC data member name	PCMBR	library name
		FILE
Output queue	OUTQ	member name
		host output queue
Library name		name
		*LIBL
Lines per page	LINES	library name
		66
Lines per inch	LPI	lines per page
		6
Characters per inch	CPI	lines per inch
		10
		characters per
Form width	WIDTH	inch
		132
Overflow line number	OVERFLOW	form width
		63
Type of form label	FORMTYPE	overflow line
		*STD
Number of copies	COPIES	forms type
		1
Place job on hold?	HOLD	number of copies
		*NO or *YES
Translation table name	TRANSFILE	TRANSLATE
Library name		file name
		*LIBL
Translation table member	TRANSMBR	library name
		ATOE3
name		member name

The PRTXFRMPC is a batch-mode command that translates PC-DOS print files that were previously transferred from the PC by the TO3XB command. The print file is added to an AS/400 print queue after the translation.

Mac Users: Do not run this procedure. It is intended for use only with PC-DOS.

FILE The AS/400 file name that contains the print file moved from the micro (with no translation having been done).

Library The name of the library containing the micro print file. *LIBL is the default.

PCMBR The member containing the micro print file. The default is FILE.

OUTQ The output queue name, where the new print item is placed after the PRTXFRMPC translation occurs.

Library The library containing the output queue. *LIBL is the default.

LINES The number of lines per page for the new print job being added to the AS/400 print queue. The default is 66.

ETU400 User Guide 011603 10-22