currently exists on the micro.
ADDRPL For transfers to existing files: indicates whether the transferred file will replace the data in the file or be added to it. The default is *REPLACE. To add to the existing data, specify *ADD.
FILETYPE The type of TOFILE file, if the host file is to be created with this command.
*DATA A physical file is created. RECL or FLDDEFFILE is used to create the data file. (This is the default.)
*SAVE Permits offline storage, and moves executable programs between micros. A record length (RECL) of 1024 is required and TRANSLATE must be *NONE. All necessary data (including Mac data and resource forks) is transferred. Data is not translated to EBCDIC, and therefore cannot be used on the host. To restore data to the micro, use the FROM3XB command with the SAVTYPE parameter.
*SRC A source physical file is created. If *SRC is used, 12 bytes will be added to the value in RECL.
*SAVF A save file is created. A record length (RECL)of 528 bytes is required and TRANSLATE must be *NONE.
NOTE: To create a *SAVF object, you must be authorized to execute the CRTSAVF command.
SRCSEQ Determines whether a
*NO Do not add the sequence number/date field. The record length is equal to that specified (the default).
*YES Add the sequence number/date field. Actual record length will be 12 greater than the record length specified in the RECL parameter.
Note that SRCSEQ can be specified even if the file is not translated, in which case untranslated data would be sequenced.
TRUNCATE For *TEXT translations only: Specifies whether the text is to be truncated or folded in the event that the length of the file is longer than the record length specified in the parameter RECL.
*NO The data is folded (this is the default).
ETU400 User Guide 011603 |
|
