![](/images/new-backgrounds/1146581/146581543x1.webp)
About This Appendix
Some users of ETU/400 may be more familiar with the operating system of System/36 than with that of the AS/400. For this reason, ETU/400 supports a set of commands in System/36 mode, in addition to the native AS/400 commands.
The commands that are supported in both the native mode and System/36 mode are listed in this chapter. Any native command can be used by a
However, most native commands do not return status codes in the LDA so the abnormal completion of a native command cannot be detected by the OCL procedure. For this reason,
are available in ETU/400.
This appendix describes how to access the
ETU400 User Guide 011603 |