Library The library containing the source for the translation tables. *LIBL is the default.
TRANSMBR The TRANSFILE member name. The default name is ETOA1, an
RECL The record length of the translation work file. Valid record length entries are:
*FILE The record length of the FRMFILE file is used.
If an ASCII
FLDDEFFILE Specifies the file that defines the file being transferred. If the file being transferred was not externally defined and the translation type is either *DIF, *TAB, or *BASICS, you must specify a source physical file containing either physical file data description specifications (DDS), or file and input (F&I) specifications.
If the file being transferred was previously defined with either DDS or F&I specifications, or is a *TEXT translation type, use the default, *NONE, or its equivalent, *DDS.
FLDDEFMBR The FLDDEFFILE member name. You can enter the member name or one of the following values:
*FILE Transfers the member with same name as the
FLDDEFFILE.
*FIRST Transfers the first member (arrival sequence)in the file.
*LAST Transfers the last member (arrival sequence)in the file.
QFNAME1 The name of the micro file to contain the data from the AS/400. For additional information, See About Microcomputer Files in Chapter 3.
SAVRQS Saves the current request definition so it can be used at a later time. The request definition is this completed FROM3XB command with the parameter values as you have specified them. The default is *NO. To save the request definition, specify *YES and enter the request name you desire.
Request Name The name of the SAVRQS request definition. The request name can be up to ten characters long. (To recall the saved request, use the ETU command VWSAVRQS.)
ETU400 User Guide 011603 |
|