
PRTTO3X Command
Parameter description | Parameter name | Parameter values |
Qualified file name | QFNAME | micro file name |
Output queue | OUTQ | host output queue |
Library name |
| name |
| *LIBL | |
Lines per page | LINES | library name |
66 | ||
Lines per inch | LPI | lines per page |
6 | ||
Characters per inch | CPI | lines per inch |
10 | ||
|
| characters per |
Form width | WIDTH | inch |
132 | ||
Overflow line number | OVERFLOW | form width |
63 | ||
Type of form label | FORMTYPE | overflow line |
*STD | ||
Number of copies | COPIES | forms type |
1 | ||
Place job on hold? | HOLD | number of copies |
*NO or *YES | ||
Translation table name | TRANSFILE | TRANSLATE |
Library name |
| file name |
| *LIBL | |
Translation table member | TRANSMBR | library name |
ATOE3 | ||
name |
| member name |
The PRTTO3X command is an interactive command that transfers
Mac Users: Do not run this procedure. It is intended for use only with
QFNAME1 The name of the micro file to be moved to the AS/400. For additional information, see About Microcomputer Files, in Chapter 3.
OUTQ The output queue name where the new print item is placed when it is transferred from the micro.
Library The library containing the output queue. *LIBL is the default library name.
LINES The number of lines per page for the new print job being added to the AS/400 print queue. The default is 66.
LPI The number of lines per inch to allocate to the new print job being added to the AS/400 print queue. The default is 6.
CPI The number of characters per inch to allocate to the new print job being added to the AS/400 print queue. The default is 10.
WIDTH The width of the forms being printed. Valid entries are 1 through 198. The default value is 132.
ETU400 User Guide 011603 |