Emulex LP1150-F4 CLI Client Command Reference Version, ListHBAs, SaveConfig, Sample response

If you don’t know the IP address, but you know the host name, type:

hbacmd h=cp-compaq8000 listHBAs

If the host is unreachable, the command will return an error.

CLI Client Command Reference

Version

Syntax: HBACMD Version

Description: Shows the current version of the HBAnyware CLI client application. To view the version, type:

hbacmd version

Sample response:

HBAnyware Command Line Interface: Version 3.0

Parameters: None.

ListHBAs

Syntax: HBACMD ListHBAs

Description: Shows a list of the discovered manageable Emulex HBAs and some of their attributes. The list will contain one 6-attribute group for each discovered HBA. Example of an attribute group list:

Manageable HBA List

Port WWN:	10:00:00:00:c9:20:08:cc
Node WWN:	20:00:00:00:c9:20:08:cc
Fabric Name:10:00:00:60:69:90:0b:f6
Flags:	0000f900
Host Name:	CP-EMULEX-DECPC
Mfg:	Emulex Corporation

Parameters: None.

SaveConfig

Syntax: HBACMD SaveConfig <wwpn> <filename> <ctrlword>

Description: Saves the contents of the driver parameter list to a file for the specified HBA. The ASCII file lists parameter definitions, delimited by a comma. Each definition is of the form:

<parameter-name>=<parameter-value>

Save either the values of the global set or those specific to the referenced HBA. The file created by this command stores itself in the Emulex Repository directory.

Example:

hbacmd SaveConfig elxstor-5-1.20A0.dpv 10:00:00:00:c9:2e:51:2e N

Sample response:

HBACMD_SaveConfig: Success writing driver parameters to file

C:\Program Files\HBAnyware\Emulex Repository\elxstor-5-1.20A.dpv

Parameters:

WWPN - The World Wide Port Name of the HBA. This HBA can be either local or remote.

filename - The file name that will contain the driver parameter list upon successful completion of this command.

ctrlword - G = save the global parameter set. N = save the local (HBA-specific) parameter set.

Solaris SFS Driver User Manual Page 24