Emulex LP1150-F4 Command Descriptions emlxdrv, Setemlxs alias, Setemlxssun, Setemlxsall

emlxs	f0a5	no	no	no	2G Blade Adapter (emlxs		only)
emlxs	fc00	yes	no	yes	LP10000-S	and LP10000DC-S
emlxs	fc10	no	no	yes	LP11000-S	and LP11002-S	(emlxs only)
emlxs	fc20	no	no	yes	LPe11000-S and LPe11002-S

#

This mode of operation enables you to use the emlxdrv utility as part of a script or another program capable of executing system-level calls. For a detailed explanation of each command and its arguments, see Command Descriptions (emlxdrv) on page 126.

Command Descriptions (emlxdrv)

This section provides a list of commands that can be issued with the emlxdrv utility program. You can view the list of commands at any time by running the emlxdrv utility in interactive mode (see Interactive Mode (emlxdrv) on page 124).

set_emlxs <alias>

Sets the emlxs driver to bind to the specified devices. You must specify one of the valid adapter aliases listed on the screen. Note that each alias is shared by multiple adapter models. Driver bindings can be made only with an adapter alias and not with a specific adapter model.

You may see the message "Cannot unload module". This indicates that you must reboot the system to get a driver to unbind from that adapter alias; emlxdrv only updates the system configuration for the next boot.

Example:

emlxdrv> set_emlxs f980

Updating f980 ...

Cannot unload module: lpfc

Will be unloaded upon reboot.

Done.

set_emlxs_sun

Sets the emlxs driver to bind to all Sun devices.

Example:

emlxdrv> set_emlxs_sun

Updating fc00 ...

Updating fc10 ...

Updating fc20 ...

Done.

set_emlxs_all

Sets the emlxs driver to bind to all devices. You may see the message "Cannot unload module". This indicates that you must reboot the system to get a driver to unbind from that adapter alias; emlxdrv only updates the system configuration for the next boot.

Example:

emlxdrv> set_emlxs_all

Updating lpfs ...

Updating f800 ...

Updating f900 ...

Solaris SFS Driver User Manual Page 126