Emulex LP1150-F4 user manual Access Control Group Tab on a Non-MSC, ACG Icons

When you select systems in the ACG and move them to the Available Servers list, the security configuration for those systems is updated to make them unsecure. After you have configured security from the MSC for the first time, the Access Control Group tab looks similar to the following:

Figure 49: Security Configurator, Access Control Group Tab on a non-MSC system

Access Control Group Tab on a Non-MSC

On a non-MSC system, the Access Control Group tab shows the systems that are part of the client's ACG. You cannot modify the ACG on a non-MSC. (You can modify the ACG only on the MSC or a client higher in the security topology's hierarchy.) The ACG tab on a non-MSC system looks similar to the following:

Figure 50: Security Configurator, Access Control Group Tab after MSC security is configured

ACG Icons

Depending on the configured security topology, a system can be a server in one or more ACGs. It can also be a client to an ACG. The following icons indicate the state of each of the systems in the Access Control Group Servers list.

Solaris SFS Driver User Manual Page 85