Emulex LP1150-F4 user manual Installing the HBAnyware Utility Security Configurator, Compatibility

Installing the HBAnyware Utility Security Configurator

Follow these instructions to install the Security Configurator on your system.

Prerequisites

•The HBAnyware utility must be installed on the system.

•Java Runtime Environment:

Version 5 of the Java Runtime Environment (JRE) must be installed. The lputil and HBAnyware utilities will not run under earlier versions of the JRE.

The JRE and instructions for installation can be found at: http://java.sun.com/downloads/index.html.

Procedure

To install the HBAnyware utility Security Configurator from a tar file:

1.If you have not already done so, untar the EmlxApps tar file and run the unpack script to obtain the correct package version:

tar xvf EmlxApps-300b12-Solaris.tar

./unpack_apps

2.Unzip the HBAnywareSSC package file:

gunzip HBAnywareSSC-<version>-<platform>.tar.gz

3.Untar the HBAnywareSSC package file. Type:

tar xvf HBAnywareSSC-<version>-<platform>.tar

4.Run the pkgadd utility. su to ‘root’. pkgadd -d

5.When prompted by pkgadd, choose to install HBAnywareSSC.

6.If prompted by pkgadd, answer the HBAnywareSSC installation questions.

Installing or Updating the Utilities Package Manually

Compatibility

•The HBAnyware utility can be used with Solaris 10 Update 4 or later, or with SFS driver version 2.20i (Sun patch revision -19) or later

Prerequisites

•Before installing the Emulex utilities package, you must completely install:

•The Sun StorEdge SAN Foundation Software package.

•All the recommended patches as described in the Sun StorEdge SAN Foundation Software Installation Guide provided by Sun.

•If an earlier version of the emlxu utilities package is already installed on the system and you want to install a different version, follow the instructions in Removing the Utilities Package Manually on page 11, then return to this section to install the new utilities package.

Solaris SFS Driver User Manual Page 9