Emulex LP1150-F4 Editing an ASG, Security Configurator, Edit Access Sub Group Dialog Box

Editing an ASG

You can change the name, client system or reserved indices of an Access Sub-Group (ASG). To edit an ASG:

1.Start the HBAnyware Security Configurator.

2.Click the Access Sub-Group tab.

Figure 64: Security Configurator, Access Sub-Groups Tab with Available Servers

3.Select the ASG you want to edit.

4.Click Edit. The Edit Access Sub-Group dialog box is displayed.

Figure 65: Security Configurator, Edit Access Sub Group Dialog Box

5.Change the ASG information:

•Access Sub-Group Name: Change the name of the ASG. The ASG name is for identifi- cation purposes only. It does not provide any security function. Provide a name that will make it easy to remember the systems that are part of the ASG. The name can contain any alphanumeric characters, symbols or spaces (up to 31). At each level of the security topology, each ASG name must be unique. If the name is not unique at its level, an error message informs you of this when you click OK.

•Access Sub-Group Client System: Select the new system that is to be the client. If the Configurator is running on a system connected to more than one fabric, the client list contains only those systems that can be accessed by the original client of the ASG.

•Number of indices reserved for this Access Sub-Group: Select the new number of 'indi- ces' you want to reserve for the client system of the new ASG. This number reflects the number of subsequent 'child' ASGs that can subsequently be created on the new client's

Solaris SFS Driver User Manual Page 97