Emulex LP1150-F4 user manual SetPersistentBinding

PersistentBinding

Syntax: HBACMD PersistentBinding <wwpn> <source>

Description: Queries the presence of any persistent binding that may exist for the specified WWPN. The <source> is used to query either the configured or live state of any binding that may be present. To view the configured persistent binding for an adapter whose WWPN is 10:00:00:00:c9:20:0d:36, enter:

hbacmd persistentbinding 10:00:00:00:c9:20:0d:36 C

Sample response:

Persistent Binding for 10:00:00:00:c9:20:0d:36

Bind Type		: WWPN
FCP ID		: 10101SCSI
Bus Number:		0SCSI
Target Num:		0Node
WWN	:	20:00:00:D0:B2:00:30:40
Port WWN		: 20:00:00:D0:B2:00:30:40
OS Device Name : \\.\Scsi:4:0
Bind Type		: WWPN
FCP ID		: 10FEFSCSI
Bus Number:		0SCSI
Target Num:		1Node
WWN	:	50:06:04:8A:CC:C8:99:00
Port WWN		: 50:06:04:8A:CC:C8:99:00

OS Device Name : \\.\Scsi:4:1

If the binding does not exist, only the first line is returned. Parameters:

WWPN - The World Wide Port Name of the HBA whose dump files you want to delete. source - C if the configured state is being queried. L if the live state is being queried.

SetPersistentBinding

Syntax: HBACMD SetPersistentBinding <wwpn> <scope> <bindtype> <ID> \ <scsibus> <scsitarget>

Description: Sets a persistent binding between a Fibre Channel target and a Scsi bus and target. The binding can be to a target WWPN, target WWNN, or target D_ID. To bind permanently, on behalf of HBA 10:00:00:00:c9:2e:51:2e, target WWPN 20:00:00:d0:b2:00:30:40 to Scsi bus 1, target 3, enter:

hbacmd setpersistentbinding 10:00:00:00:c9:2e:51:2e P P \ 20:00:00:d0:b2:00:30:40 1 3

To bind immediately, on behalf of HBA 10:00:00:00:c9:2e:51:2e, target D_ID 10101 to Scsi bus 1, target 3, enter:

hbacmd setpersistentbinding 10:00:00:00:c9:2e:51:2e I D \ 10101 1 3

If there are no errors, a response to the last example would be:

Set Persistent Binding for 10:00:00:00:c9:2e:51:2e I D \ 10101 1 3

Parameters:

WWPN - The World Wide Port Name of the HBA for which a persistent binding is to be set. This HBA can be either local or remote.

scope - P = binding is permanent (survives across reboot). I = binding is immediate. B = binding is both permanent and immediate.

bindtype - P = enable binding by WWPN. N = enable binding by WWNN. D = enable binding by D_ID.

Solaris SFS Driver User Manual Page 35