Emulex LP1150-F4 user manual Parmget label, Parmset label value

-----------------------------------------------------------------
label: assign-alpa
min:	0x0
current:	0x0
max:	0xef
default:	0x0
dynamic: no
desc: Assigns a preferred ALPA to the port. Only used in Loop topology.
-----------------------------------------------------------------
label: adisc-support
min:	0
current:	1
max:	2
default:	1
dynamic: yes
desc: Sets the Fibre Channel ADISC login support level.
-----------------------------------------------------------------
label: pm-support
min:	0
current:	1
max:	1
default:	1
dynamic:	no
desc:	Enables power management support.

parm_get <label>

Gets the value of a specified parameter in the driver.

Example:

emlxadm> parm_get adisc-support

label: adisc-support min: 0

current: 1 max: 2 default: 1

dynamic: yes

desc: Sets the Fibre Channel ADISC login support level.

parm_set <label> <value>

Sets the value of a specified parameter in the driver. Only dynamic parameters can be set. Example: This example sets a dynamic parameter:

emlxadm> parm_set adisc-support 2

label: adisc-support min: 0

current: 2 max: 2 default: 1

dynamic: yes

desc: Sets the Fibre Channel ADISC login support level.

Note: To make this change permanent, you must edit the /kernel/drv/emlxs.conf file.

Example: This example attempts to set a static parameter:

emlxadm> parm_set network-on 1

emlxadm: EMLX_PARM_SET: Parameter (network-on) is not dynamic and cannot be changed here.

**	To make this change you must edit	the	/kernel/drv/emlxs.conf or **
**	the /kernel/drv/emlx.conf file(s)	and	reboot the system.	**

Solaris SFS Driver User Manual Page 118