Restoring All Parameters to Their Earlier Values

If you changed parameters, but did not click Apply and you want to restore the parameters to their last saved values, click Restore.

Resetting All Default Values

If you want to reset all parameter values to their default (factory) values, click Defaults.

Setting Driver Parameters for a Host

To change the driver parameters for HBAs installed in a host:

1.Start the HBAnyware utility.

2.Do one of the following:

From the menu bar, click View, then click Sort by Host Name.

From the toolbar, click the Sort by Host Name button.

3.In the discovery-tree, click the host whose HBA driver parameters you wish to change.

4.Click the Host Driver Parameters tab. If there are HBAs with different driver types installed, the installed Driver Types menu shows a list of all driver types and driver versions that are installed on the HBAs in the host. Select the driver whose parameters you wish to change. This menu does not appear if all the HBAs are using the same driver.

5.In the Host Driver Parameters tab, click the parameter that you want to change. A description of the parameter appears on the right side of the dialog box.

Figure 25: HBAnyware Utility, Host Selected - Driver Parameters Tab

6.Enter a new value in the Value field. You must enter values in decimal or hexadecimal format, depending on how the current value is presented. If the value is in hexadecimal format, it is prefaced by "0x" (for example 0x2d).

Solaris SFS Driver User Manual

Page 62

Page 69
Image 69
Emulex LP1150-F4 user manual Setting Driver Parameters for a Host, Restoring All Parameters to Their Earlier Values