Emulex LP1150-F4 user manual Loopback, DeleteDumpFiles

Count - The number of times to run the test.

StopOnError - Should the test be halted on Error? 0 = no halt, 1 = halt

Loopback

Syntax: HBACMD loopback <wwpn> <type> <count> <StopOnError>

Description: Runs the loop test on the HBA specified by the WWPN.

Note: Only external Loopback tests must be run out-of-band.

To run the loop test for HBA 10:00:00:00:c9:2e:51:2e, type:

hbacmd loopback 10:00:00:00:c9:2e:51:2e 1 10 0

Sample response:

Running Loopback: polling for results......

Loopback Test Failed; xmit errors = 3; rcv errors = 2; time to execute = 1015 ms.

Parameters:

WWPN - The World Wide Port Name of the HBA on which to run the loopback test(s).

Type -Type of loopback test where: 0 = PCI LoopBack Test, 1 = Internal LoopBack Test, 2 = External LoopBack Test

Count - The number of times to run the test (Range = 1,...10000) StopOnError - Should the test be halted on Error? 0 = no halt, 1 = halt

Dump

Syntax: HBACMD dump <wwpn>

Description: Runs the dump diagnostic retrieval command on the HBA specified by the WWPN. This command is supported for local HBAs only. The file by default is located in: /usr/sbin/hbanyware/Dump

To run the dump diagnostic retrieval command for HBA 10:00:00:00:c9:2e:51:2e, type:

hbacmd dump 10:00:00:00:c9:2e:51:2e

Parameters:

WWPN - The World Wide Port Name of the HBA on which to you want to run the dump.

DeleteDumpFiles

Syntax: HBACMD deletedumpfiles <wwpn>

Description: Deletes all dump files associated with the HBA specified by the WWPN. To delete all dump files for HBA 10:00:00:00:c9:2e:51:2e, type:

hbacmd deletedumpfiles 10:00:00:00:c9:2e:51:2e

Sample response:

HBACMD: Dump file deletion complete.

Parameters:

WWPN - The World Wide Port Name of the HBA whose dump files you want to delete.

Solaris SFS Driver User Manual Page 34