Emulex LP1150-F4 Starting the HBAnyware Utility, Starting HBAnyware with Web Launch, Procedure

Using the HBAnyware Utility

Starting the HBAnyware Utility

Note: The HBAnyware utility can only discover and manage remote HBAs on hosts running the HBAnyware utility’s elxhbamgr daemon.

Note: Remote in-band capabilities of the HBAnyware utility are subject to fabric zoning configuration. Remote hosts you want to discover and manage using the HBAnyware utility must be in the same zone or discovered and managed out-of-band through an Ethernet connection.

To start the HBAnyware utility:

1.Login as or su to ‘root’.

2.Run the script:

/usr/sbin/hbanyware/hbanyware

Starting HBAnyware with Web Launch

After the HBAnyware Web Launch software has been installed and the Web Launch server has been initialized, you can launch the HBAnyware utility directly with your Web browser.

To launch the HBAnyware utility with your Web browser:

1.Open your Web browser.

2.Enter the URL of an HBAnyware.jnlp file. Make sure that the URL specifies a remote server which has the HBAnyware Web Launch software installed and running. For example:

http://138.239.20.30/hbanyware.jnlp

Note: If the browser window displays “Emulex Corporation HBAnyware Demo of HBAnyware WebStart web n.n.n.n ...” when attempting to start HBAnyware with Web Launch, refer to the “Troubleshooting” section on page 131.

Starting the HBAnyware Security Configurator

Prerequisites

•Make sure that all of the systems that are part of, or will be part of, the security configuration are online on the network so that they receive updates or changes made to the security configuration.

•Before running the security configurator out-of-band, you must set up the OOB hosts so they will be seen by the security configurator. For more information, see Out-of-Band SAN Management on page 77

Procedure

If this is the first time you are starting the configurator, see Starting the Security Configurator for the First Time: Creating the First ACG, Designating the MSC and Selecting Systems in the FC Network on page 82.

To start the HBAnyware Security Configurator for Solaris:

1.Login as or su to ‘root’.

2.Run the script:

/usr/sbin/hbanyware/ssc

Solaris SFS Driver User Manual Page 18