Emulex LP1150-F4 user manual Security Configuration Situations Access Sub-Groups ASG

Security Configuration Situations - Access Sub-Groups (ASG)

Table 3: HBAnyware Security Configurator - Access Sub-Groups Situations

Situation	Resolution
ASG Appears to Be Non-Hierarchical. It is	Non-Hierarchical and Hierarchical ASG
possible from a higher-level client (such as	It is possible from a higher-level client (such as the MSC) to
the MSC) to create an ASG 1 with system A	create an ASG 1 with system A as the client
as the client and systems B, C, D, and E as	and systems B, C, D, and E as servers. Then create an
servers. Then create an ASG 2 with system E	ASG 2 with system E as the client, but with
as the client, but with systems F and G as	systems F and G as servers even though F and G are not
servers even though F and G are not part of	part of ASG 1. This makes the topology non-hierarchical:
ASG 1. This makes the topology non-
hierarchical.

Cannot add or remove a server.	When all of the systems in an ACG are running on a single
	fabric, they are all available to be added to any ASG.
	However, if the client is connected to more than one fabric,
	it is possible that not all of the servers in the client's ACG
	are physically accessible by a chosen client for an ASG. In
	this case, those servers are not available to be added to
	that ASG.
	If you add a system to an ASG as a server, and then make
	the system a client to a child ASG, you cannot remove it
	from the ACG it belongs to as a server until you delete the
	ASG to which it is a client.
	Before you delete a server from an ASG, you must first
	remove the server from any lower level ASGs to which it
	belongs.
In the ASG tree of the Access Sub-Groups	The client system for the ASG was not discovered when the
tab, one or more of the names of the ASGs	Configurator was started. This is actually a symptom of two
is displayed as "- ASG (Client Offline) -".	different problems.
	• All Servers Are Not Displayed
	• New Keys Were Generated While Servers Were Offline
	See Table 6 on page 137 for details regarding these
	problems.

Solaris SFS Driver User Manual Page 134