Emulex LP1150-F4 user manual Host Driver Parameters Tab, Driver Parameter Tab Field Definitions

The Host Driver Parameters Tab

The Host Driver Parameters tab (Figure 8) enables you to view and edit the HBA driver settings contained in a specific host. The host driver parameters are global values and apply to all HBAs in that host unless they are overridden by parameters assigned to a specific HBA using the HBA Driver Parameters tab. For each parameter, the tab shows the current value, the range of acceptable values, the default value, and whether the parameter is dynamic (a dynamic parameter allows the change to take effect without resetting the HBA or rebooting the system).

For more information on changing the parameters for a single HBA, see Setting Driver Parameters for an HBA on page 61.For more information changing the parameters for the host, see Setting Driver Parameters for a Host on page 62.

Figure 8: HBAnyware Utility, Driver Parameters Tab - Host Selected

Note: If there is more than one driver type installed, the Installed Driver Types menu shows a list of all driver types and driver versions that are installed on the HBAs in the host.

Driver Parameter Tab Field Definitions

•Installed Driver Type - The current driver and version installed.

•Adapter Parameter table - A list of HBA driver parameters and their current values.

•Parameter-specific information - The details about the parameter appears on the right side of the tab.

Driver Parameter Tab Buttons

•Restore - Click to save and restore parameters to this last saved value, if you have made changes to parameters and have not saved them by clicking Apply.

•Defaults - Click to reset all parameter values to their default (out-of-box) values.

•Apply - Click to apply any driver parameter changes. If you changed a parameter that is not dynamic, you must unload the driver and reload it.

Solaris SFS Driver User Manual Page 43