Emulex LP1150-F4 user manual Adding a Single Host, HBAnyware Utility, Add Remote Host Dialog Box

Adding a Single Host

The HBAnyware utility enables you to specify a single OOB host to manage. If the host is successfully discovered as a manageable host, it is added to the static list of hosts and if it has not been discovered in-band, the host and its HBAs are added to the discovery tree.

To add a single host:

1.Start the HBAnyware utility.

2.From the Discovery menu, select Out-of-Band/Add Host. The Add Remote Host dialog box appears.

Figure 42: HBAnyware Utility, Add Remote Host Dialog Box

3.Enter the name or the IP address of the host to be added. Entering the IP address is the best way to add a new host.

Note: Using the IP address to identify the host avoids name resolution issues.

4.Click OK. You will receive a message indicating whether or not the new host was successfully added.

Solaris SFS Driver User Manual Page 78