Performing Diagnostic Tests

Use the Diagnostics tab to do the following:

Run these tests on Emulex HBA's installed in the system:

PCI Loopback (see page 74)

Internal Loopback (see page 74)

External Loopback (see page 74)

Power-On Self Test (POST) (see page 71)

Echo (End-to-End) (see page 75)

Quick Test (see page 70)

Perform a diagnostic dump (see page 72).

View PCI registers and wakeup parameter (see page 72).

Control HBA beaconing (see page 71).

Figure 31: HBAnyware Utility, Diagnostics Tab

All functions are supported locally and remotely, except for the dump feature which is only supported locally.

Running a Quick Test

The Diagnostics tab enables you to run a "quick" diagnostics test on a selected HBA. The Quick Test consists of 50 PCI Loopback test cycles and 50 Internal Loopback test cycles.

To run a quick test:

1.Start the HBAnyware utility.

2.From the discovery-tree, select the HBA on which you wish to run the Quick Test.

Solaris SFS Driver User Manual

Page 70

Page 77
Image 77
Emulex LP1150-F4 user manual Performing Diagnostic Tests, Running a Quick Test