Wakeup

Syntax: HBACMD wakeup <wwpn>

Description: Shows wakeup parameter data for the HBA specified by the WWPN. To show wakeup parameter data for HBA 10:00:00:00:c9:2e:51:2e, type:

hbacmd wakeup 10:00:00:00:c9:2e:51:2e

Sample response:

Wakeup Parameters:

 

 

Initial Load:

0x02C03992

0x00103411

Flags:

0x00000000

 

Boot BIOS

0x03433290

0x00101303

SLI-1:

0x06433992

0x00103411

SLI-2:

0x07433992

0x00103411

Has Expansion ROM

0

 

Parameters:

WWPN - The World Wide Port Name of the HBA whose wakeup parameter data you want to show.

LoopMap

Syntax: HBACMD loopmap <wwpn>

Description: Shows the arbitrated loop map data for the HBA specified by the WWPN. To show the arbitrated loop map data for HBA 10:00:00:00:c9:2e:51:2e, type:

hbacmd loopmap 10:00:00:00:c9:2e:51:2e

Below is a sample response:

AL_PA:

01 Local Adapter

E8 SCSI Device

E4 SCSI Device

CA SCSI Device

Parameters:

WWPN - The World Wide Port Name of the HBA whose loopmap you want to show.

GetBeacon

Syntax: HBACMD getbeacon <wwpn>

Description: Shows the current beacon status for the HBA specified by the WWPN. To show the current beacon status for HBA 10:00:00:00:c9:2e:51:2e, type:

For example, type:

hbacmd getbeacon 10:00:00:00:c9:2e:51:2e

Possible responses are:

Beacon State = On

Beacon State = Off

Unable to get Beacon state, error 1

Beaconing not supported on host or adapter

Parameters:

WWPN - The World Wide Port Name of the HBA whose beacon status you want to show.

Solaris SFS Driver User Manual

Page 32

Page 39
Image 39
Emulex LP1150-F4 user manual Wakeup, LoopMap, GetBeacon, Below is a sample response, Possible responses are