Running ETU Commands

With ETU, there are two ways to run commands: using the ETU menu, or entering ETU commands on the command line. Both methods produce the same result; that is, a prompt screen displays on which you provide information like the name of the file you want to transfer, and where you want to transfer the file. ETU menus have an option field or a command line, but not both, depending on your authority.

Using the Menu

Once you display the menu using the WSMENUS command, enter the menu option number that corresponds to the command you want to run. ETU displays a prompt screen on which you enter the information necessary to carry out, or execute, the command. The ETU commands are listed later in this chapter.

Entering Commands on the Command Line

Each ETU function has a command name that is recognized by the AS/400. To execute any ETU command, enter the command name on the AS/400 command line, and prompt (press F4) for the information about that command. For example, to transfer a file from the workstation to the host using the TO3XB command, enter TO3XB on the command line and press F4. This displays the TO3XB prompt screen (see Figure 3-3 below) on which you enter the information about the transfer.

The prompt screen that displays when you press F4 is identical to the one that displays when you initiate the command from the menu.

NOTE: Depending on your authority level, the ETU menu will display either an option field or a command line.

Figure 3-3 The TO3XB prompt screen

Transfer to 3X: (TO3XB)

Type choices, press Enter.

 

 

File name:

. . . . . .

. . . . .

 

Name

Library name: . . .

. . . . .

*LIBL

Name, *LIBL

Member name:

. . . . .

*FILE

Name, *FILE

Record length (0=existing): . .

 

0-9989

File type:

. . . . . .

. . . . .

*DATA

*DATA, *SRC, *SAVE, *SAVF

Add seq/date field ?:

*NO

*YES, *NO

Type of translate ?: .

. . . . .

*TEXT

*NO, *TEXT, *DIF, *BASICS...

Translation table file name: . .

TRANSLATE

Name, TRANSLATE, MACTAB

Library name: . . .

. . . . .

*LIBL

Name, *LIBL

Member name:

. . . . .

ATOE1

Name

Truncate text: . . . .

. . . . .

*NO

*YES, *NO

DDS or F & I file name: . . . .

*NONE

Name, *NONE, *DDS

Library name: . . .

. . . . .

*LIBL

Name, *LIBL

Member name:

. . . . .

*FILE

Name, *FILE, *FIRST, *LAST

Qualified

file name: .

. . . . .

 

 

 

 

 

 

More...

F3=Exit

F4=Prompt

F5=Refresh

F12=Cancel

F13=How to use this display

F24=More keys

 

 

 

ETU400 User Guide 011603

3-7

Page 42
Image 42
Nlynx ETU400 manual Running ETU Commands, Using the Menu, Entering Commands on the Command Line