![](/images/new-backgrounds/1146581/146581225x1.webp)
The PCTOPC Command
To transfer a single file from one micro to multiple micros, specify the name of the file, the device name of the micro from which the file is being transferred, and the name of the device or devices to which the file is being transferred.
QFNAME1 | The name of the micro file to be transferred. If |
| you are transferring a file to multiple micros, |
| the file name, including the path name, must be |
| identical on each micro. For additional |
| information, see About Microcomputer Files in |
| Chapter 3. |
MICLST1 | The device name of the source micro. The default, |
| *REQUESTER, transfers the file from the micro on |
| which the PCTOPC command is currently being run. |
| (To transfer a file from a different micro, enter |
| the device name of the micro. You must be |
| authorized to use the device you specify in this |
| parameter, or the transfer will fail.) |
|
|
| NOTE: This parameter must be changed from |
| *REQUESTER to the name of the source micro when |
| you run this command in batch mode. |
MICLST2 | The device name of the micro to which the file is |
| being transferred. You can transfer the file to |
| up to ten micros. (To transfer the file to more |
| than one micro, enter the device name of each |
| micro. You must be authorized to use each device |
| you specify in this parameter, or the transfer |
| will fail.) |
| Enter a plus sign ( ) here and press ENTER to |
| display multiple MICLST2 prompts. |
| Each device you transfer to must be powered on, |
| have emulation loaded, and have the AS/400 sign- |
| on screen displayed. |
ETU400 User Guide 011603 |