Nlynx ETU400 manual Figure C-2 The AS400 PDM screen

To create a DDS specs for a file, use the PDM (Programming Development Manager) utility on the AS/400. The steps below and on the following pages describe how to create DDS specs for the file shown on the previous page.

1.Log on to the AS/400.

2.Type STRPDM on the command line of the AS/400, and then press ENTER. The AS/400 PDM screen, shown in Figure C-2, appears. Select option 3 and press ENTER to work with members.

If you receive an error after this command, you may not have the authority to perform this task; see your system administrator.

Figure C-2 The AS400 PDM screen

AS/400 Programming Development Manager (PDM)

Select one of the following:

1.Work with libraries

2.Work with objects

3.Work with members

9. Work with user-defined options

Selection or command

===>

F3=Exit	F4=Prompt	F9=Retrieve	F10=Command entry
F12=Cancel	F18=Change defaults

(C) COPYRIGHT IBM CORP. 1981, 1996.

ETU400 User Guide 011603 C-4