Nlynx ETU400 manual PRTFROM3X Command, Outq, ET0A1

PRTFROM3X Command

Parameter description	Parameter name	Parameter values
Output Queue	OUTQ	output queue name
Library name		*LIBL
Translation table name	TRANSFILE	library name
		TRANSLATE
Library name		table file name
		*LIBL
Translation table member	TRANSMBR	library name
		ET0A1
name		member name

The PRTFROM3X command allows you to transfer a print file from the host to a micro. This command is interactive only. It displays a list of items in a host print output queue to be reformatted for printing on the micro.

Mac Users: Do not use this procedure. It is intended for use only with PC-DOS.

OUTQ The qualified print output queue. This option displays a print queue screen. On this screen, enter 1 or 2 next to the print item(s) to be copied for use on the micro.

1=Copyprt Performs the AS/400 command CPYSPLF, translates the file for the micro, and stores it in the AS/400 file which you specify on the TRANSLATE prompt screen (see Figure 10-1 on the following page). You will then transfer the file to the micro using the FROM3XB command.

2=Copyprt & Transfer Performs the AS/400 command CPYSPLF, translates the file for the micro, and displays a FROM3XB prompt (see Figure 10-2) for the transfer of the translated work file from the AS/400.

NOTE: You must specify TRANSLATE (*NO) in the FROM3XB command. This is because the PRTFROM3X command performs the translation.

NOTE: If the OUTQ that you specify has a lot of files in it, the command takes more time to process.

Library The name of the library containing the OUTQ. *LIBL is valid.

TRANSFILE The qualified file name of the translation table file to be used. The default is TRANSLATE.

Library The name of the library containing the TRANSFILE. *LIBL is valid.

TRANSMBR The TRANSFILE member name. The default name is ETOA1, an EBCDIC-to-ASCII table supplied with ETU.

ETU400 User Guide 011603 10-18