Nlynx ETU400 manual Pcfrompc Command, MICLIST1, MICLIST2

PCFROMPC Command

Parameter description	Parameter name	Parameter values
Qualified file name	QFNAME	micro file name
Transfer from which	MICLIST1	Device name(s) of
micro?		one or more
Transfer to which micro?	MICLIST2	micros.
		*REQUESTER device
		name of target
Save request definition?	SAVRQS	micro
		*YES or *NO
Request name	DSPSTSMSG	Name
Display status message?		*YES or *NO

The PCFROMPC command transfers a file from one or more microcomputers to a single microcomputer. All micros involved in a file transfer must be of the same platform, either Mac or DOS-based PC, but not both.

NOTE: Before using PCFROMPC to transfer multiple files to a single micro, review Transferring Files With PCFROMPC and PWRTO3XB in Chapter 9 in order to minimize the risk of copying over previously transferred files.

QFNAME1 The name of the micro file to be transferred. If you are transferring a file from multiple micros, the file name, including the path name, must be identical on each micro. For additional information, see About Microcomputer Files in Chapter 3.

MICLST1 The device name of the source micro(s). To transfer a file from more than one micro, enter the device name of each. (You must be authorized to use each device you specify in the MICLIST1 parameter. If you can sign on to the device, then you are authorized to use it.)

Enter a plus sign () here and press ENTER to display multiple prompts in which to enter the device names.

Each micro from which you transfer data must be powered on, have emulation loaded, and have the AS/400 sign-on screen displayed.

ETU400 User Guide 011603 10-12