1.Sign on to the AS/400 as QSECOFR.
2.Ensure that library QTEMP is in your library list.
3.Insert ETU software in the AS/400:
•If you are installing from diskettes, insert the first diskette into the drive on the AS/400.
•If you are installing from tape, load the tape into the tape drive.
•If you are installing from CDROM, insert the CDROM into the CDROM drive.
4.On the AS/400 command line, enter the RSTOBJ command interactively as follows:
For tape or diskette:
RSTOBJ OBJ(ETU*) SAVLIB(QTEMP) DEV(device-name) VOL(*MOUNTED)
where device-nameis the name of the device in which you loaded the installation media (for example, OPT01, TAP01 or DKT01).
You should get 11 objects.
For CDROM:
RSTOBJ OBJ(ETU*) SAVLIB(QTEMP) DEV(OPT01) OPTFILE('/QTEMP')
You should get 11 objects.
For diskette users, re-insert diskette 1.
On the AS/400 command line, enter the ETU installation procedure. Type:
ETUINSTALL TLIBNAM(target-library) DEVNAM(device-name)
ELIBNAM(existing-library)SVTRANL(save-translations)
where:
target-libraryis the library in which ETU will reside after the install process. If the library you specify already exists, we recommend that it contain a prior version of ETU.
device-nameis the name of the device in which the installation media was loaded (for example, TAP01 or DKT01).
existing-libraryis a library on your system in which a prior version of ETU exists that contains information you wish to keep in its current state. If you want to replace your current version of ETU and keep the old library name, the target-library name should be the same as the existing-library name. Specify *NONE if there is no existing library.
save-translationsis for users who have modified or created ETU translation tables (the files TRANSLATE and MACTAB) in versions of ETU prior to 5.01, and wish to keep those translation tables for use with version 5.01. The default is (*NO) which does not keep the
ETU400 User Guide 011603 | 2-4 |
