The parameters used with PCFROMPC multiple-device transfer are described below:

Qualified file name

The name of the file to be transferred. If you

 

are transferring a file from multiple micros, the

 

file name, including the path name, must be

 

identical on each micro.

MICLST1

The device name of the source micro(s). To

 

transfer a file from more than one micro, enter

 

the device name of each. (You must be authorized

 

to use each device you specify in the MICLIST1

 

parameter. If you can sign on to the device, then

 

you are authorized to use it.)

 

Enter a plus sign ( ) here and press ENTER to

 

display multiple MICLST1 prompts in which to

 

enter the device names.

 

Each device you transfer from must be powered on,

 

have emulation loaded, and have the AS/400 sign-

 

on screen displayed.

MICLST2

The device name of the target micro. The default,

 

*REQUESTER, transfers multiple files to the micro

 

from which you initiate the command. (You must be

 

authorized to any device you specify in this

 

parameter or the transfer will fail.)

 

Files transferred to the target micro have the

 

same names as the devices from which they came.

 

Device names can be up to ten characters long. If

 

the device name of the source micro is longer

 

than eight positions, the file name on the target

 

micro will be in the format: XXXXXXXX.XX.

 

For example, a file transferred from a micro with

 

device name Port5 Addr3 to another micro is

 

called PORT5ADD.R3.

 

 

 

NOTE: MICLST2 must be changed from *REQUESTER to

 

the target micro name when you run this command

 

in batch mode.

ETU400 User Guide 011603

9-8

Page 112
Image 112
Nlynx ETU400 manual MICLST1